Operation Manual

2 Basic functions of the system
This section describes the basic functions of the system and
provides information on how to start using and efficiently
navigating the main program options.
2.1 Program start-up
Following the successful installation and registration of the
program and the maps, the program is ready to use. Its start-up
method depends on the type of the navigation device. On a
typical PocketPC portable device, you can run the program by
selecting it from the "Start" menu or directly from the start
screen. If the map has not been registered, the program will
display the relevant request upon start.
After the first start-up, the display will show a language
selection screen for the program interface (the screen is
displayed only if more languages have been installed).
Then, after the first start-up, a window will be displayed asking
the user to choose a profile. Profiles store settings and they
enable the user to quickly switch between groups of settings
(e.g. for driving a company truck and a private car). When the
"Use as default profile" option is selected, the settings from the
chosen profile will be loaded automatically every time the
program starts, and the user will not be prompted to select a
profile.
The "AutoMapa - Warning" screen
Then the "AutoMapa - Warning" screen will be displayed,
containing information and instructions regarding safety of use
when driving. After reading its contents, tap the OK button
located at the bottom left corner of the screen to continue. To
disable the display of the message at the next start-up, check
the "Do not show this again" box at the bottom corner of the
screen.