User manual

0=settings menu not protected

by PIN.

P1 PIN

Protection

Read/Write 00 00 to

1=settings menu protected by

PIN.

P2 PIN

Number

Read/Write 0000 0000 to

9999

The PIN number for the

settings menu.

0=do not reset all of program

and engineering data to default

settings.

P3 Factory

Reset

Read/Write 00 00 to

1=reset all of program and

engineering data to default

settings.

Values C1 to C6 are used to assign the sensors which are to be considered

by each zone. This table can be used for each zone to establish the correct

setting for C1 to C6.

Sensor Number ‘1’ if used, /’0’ if

not

Multiplier Multiplied Value

S1 x 1 =

S2 x 2 =

S3 x 4 =

S4 x 8 =

S5 x 16 =

S6 x 32 =

Total value

(use for C1 to C6)