User manual

16
Two timeslots per day are allowed, where each timeslot includes an ON and
OFF time.
Once a day’s time program has been completed the day icon will flash for the
next day.
To finish with the program settings press cancel or reset after pressing OK for
the last programmed day.
3.8 Setting the Lux level
Lux levels can be programmed for each zone. There will be light level demand
when any lux sensor assigned to a zone reads a lux level equal to or less than
the programmed value.
Press the set button four times from the main screen to access the set lux
option.
The SET and OK? Icons will be displayed, with the LUX icon flashing.
Press OK to accept the Set Lux function.
A zone number will now be flashing to the right of the display. Use the + and –
keys to select the required zone and press OK.
A lux level will flash in the centre of the display.
Use the + and – keys to adjust the assigned lux level. The lux trigger level is
shown in thousands of lux and can range from 0.1 (100 lux) to 20(20,000 lux).
Pressing and holding a key will force an accelerated cycle through values.
Press OK to confirm the required level.
A prompt to program the next zone in sequence will now appear. Continue
programming lux levels as required, and press cancel when finished.
3.9 Setting GMT/ BST
The SUMMER/WINTER key offers a quick means to change between GMT
and BST, without the need to re-programme the clock.
Press the SUMMER/WINTER key when in normal display mode. The clock
value will be displayed with the hour digit flashing one hour advanced.
A second press of SUMMER/WINTER key will set the clock to one hour
behind. A third press will return the clock to its current value.
Further presses cycle through these clock values.
Press OK to accept the appropriate time.