User manual
14
3.6 Setting the Auto Mode
Auto Mode defines which controller or sensor inputs the zone will respond to
when activating the zone relay.
Auto Off means the zone will only respond to the panic override and frost
settings.
Auto Lux
means that the zone will be controlled by light level sensors and/or
PIR sensors, as assigned under the Engineers Menu.
Auto Clock
means the zone will be controlled by the on off time settings
made under the set program menu.
Auto Lux Clock means that the zone will be controlled by the timer and any
assigned sensors for that zone (see Engineers Menu to find out how to assign
sensors to a zone)
Press the set button twice from the main screen to access the set auto option.
The icons SET AUTO and OK? Will be displayed with the AUTO icon flashing.
Press OK to accept the set Auto function.
A prompt for the applied zone will appear to the right of the display, with “A”
meaning that the setting will be applied to all zones.
Use the + and – keys to select the zone to be configured, either all zones
(denoted by A as illustrated) or zones 1 to 6, then press OK.
The current auto setting for that zone will be shown, according to the following
table.
Clock – Auto flashing Mode: Auto Clock
Clock –Auto – Lux flashing Mode: Auto Clock Lux
Auto – Lux flashing Mode: Auto Lux
Auto – Off flashing Mode: Auto Off
Use the + and – keys to cycle through these modes and press OK to accept.
When completed, press the cancel button to return to the main screen.