Installation Manual

Title: Installation Specifications and User Manual, Radar
Sensors
Doc. No. E567781
INSTALLATION SPECIFICATION Rev. 001, Page 6 of 14
5.0 SPECIFICATIONS
5.2 SLR Sensor
(cont’d)
5.2.3 Detection Angle Elevation
Figure 3 shows the detection area of the antennas in elevation. The
detection area of ±8 ° is related to the 3dB points, this means the area
where the signal amplitude is reduced by 3dB compared to bore sight
direction. To avoid close range false objects there must not be metal
parts like screws, mounting brackets, license plate etc in an angle of
±30 ° (see figure 3). Impact reducing foam material, clips or fascia
laminations must be avoided in this area. Figure 4 shows details of
objects keep out zone.
Figure 3
Figure 4