Use and Care Manual

53
Password?] to link to our website and find your password back.
4. Select the product type and serial number, click OK to continue.
5. In the Update window, select the items you want to install. Usually, you
should install all available updates.
Generally, there are two ways to update programs:
Batch Update
1. Select the programs that you would update by clicking on the check
boxes next to those items. Then click the Update All button on the right
bottom of the screen. Click the Clear All button will reselect the items
you want to update.
2. Or, click on the Select All checkbox on the left bottom of the screen
and all updatable items will be selected automatically. Then click the
Update All button on the right side of screen.
3. When the downloading is completed, the downloaded programs will be
installed automatically. The new version will replace the old version.
Single Update
1. Find the desired updating item and click the Update button in the same
line.
2. When the downloading is completed, the downloaded program will be
installed automatically. The new version will replace the old version.
3. Insert the TF card into the scan tool, and restart the scan tool to finish
the whole update.
Figure 9- 3 Sample Update Window