Use and Care Manual

45
7 System Setup
The System Setup functions allow you to adjust default settings and view
information about the scan tool.
1) Language: Selects the desired language.
2) Unit: Sets the unit of measure to English or Metric.
3) Beep: Turns on/off beep.
4) Key Test: Checks if the keyboard is working properly.
5) LCD Test: Checks if the LCD display is working properly.
NOTE
Settings of the unit will remain until change to the existing settings is made.
To Enter the Setup menu
From the Main Screen (Figure 2- 2): Use LEFT/RIGHT scroll button to
select Setup, and press the OK button to enter the setup menu.
Language Setup
 English is the default language.
Figure 7- 1 Sample Setup Menu