Use and Care Manual

Viewing Vehicle Information

The Vehicle Info. function enables retrieval of Vehicle Identification No.

(VIN), Calibration ID Nos. (CINs), Calibration Verification Nos. (CVNs) and

In-use Performance Tracking on 2000 and newer vehicles that support

Mode 9.

1) Use UP/DOWN scroll button to select Vehicle Info. from the

Diagnostic Menu and press OK button (Figure 4- 1).

2) An advisory message comes up to remind you. Wait a few seconds or

press any key to continue.

3) Wait for the scan tool to display the Vehicle Info. menu.

 If the vehicle does not support this mode, a message shows on the

display warning that the mode is not supported.

4) From Vehicle Info. menu, use the UP/DOWN scroll button to select an

available item to view and press the OK button.

5) View retrieved vehicle information on screen.

Figure 4- 27 Sample Vehicle Info. Screen