Use and Care Manual

36
1) Use the UP/DOWN scroll button to select Component Test from
Diagnostic Menu and press the OK button (Figure 4- 1).
2) Wait for the scan tool to display the Component Test menu.
3) If the test has been initiated by the vehicle, a confirmation message will
be displayed on the screen.
 Some vehicles do not allow scan tools to control vehicle systems
or components. If the vehicle under test does not support the
EVAP Leak Test, an advisory message is displayed on the screen.
4) Wait a few seconds or press any key to return to previous screen.
Figure 4- 25 Sample Component Test Screen 1
Figure 4- 26 Sample Component Test Screen 2