Use and Care Manual

35
Figure 4- 23 Sample Nonsupport Screen
 For CAN-equipped vehicles, test results displayed can be as
below:
Figure 4- 24 Sample Test Data Screen
6) Press ESC button to return to the previous menu.
Component Test
The Component Test function allows initiating a leak test for the vehicle's
EVAP system. The scan tool itself does not perform the leak test, but
commands the vehicle's on-board computer to start the test. Different
vehicle manufacturers might have different criteria and methods for
stopping the test once it has been started. Before starting the Component
Test, refer to the vehicle service manual for instructions to stop the test.