Use and Care Manual

30
 EGS – Exhaust Gas Sensor Monitor
 PM – PM Filter Monitor
5) If the vehicle supports readiness test of “This Drive Cycle”, a screen of
the following displays.
6) Use the UP/DOWN scroll button for more PIDs if additional information
is available on more than one page. Or use the LEFT/RIGHT scroll
button to view PIDs in the previous/next page.
7) Press the ESC button to return to Diagnostic Menu.
O2 Monitor Test
OBDII regulations set by SAE require that relevant vehicles monitor and
Figure 4- 15 Sample since DTCs Cleared Screen
Figure 4- 16 Sample This Driving Cycle Screen