Use and Care Manual

22

If the codes are not cleared, then an “Erase Failure. Turn Key on
with Engine off!” message appears.
4) Press any key to return to Diagnostic Menu.
Live Data
In this function, you can not only read the live data but also record data for
later review.
View Data
The View Data function allows viewing of live or real time PID data of
vehicle’s computer module(s).
1) To view live data, use the UP/DOWN scroll button to select Live Data
from Diagnostic Menu and press the OK button.
2) Wait a few seconds while the scan tool validates the PID MAP.
Viewing Complete List
1) To view complete set of data, use UP/DOWN scroll button to select
Complete List from Live Data menu and press the OK button.
Figure 4- 6 Sample Erase Codes Screen 3