Use and Care Manual

16
3. A confirmation message “DTCs and freeze data will be deleted. Are
you sure you want to continue?” will pop up to ask for your confirmation.
Press Yes to continue.
4. Erase Codes command will be sent and you can perform Read Codes
function to verify. Press any key to continue.
Transmission
Read Codes
1. Select Transmission control module from the system list. The list
may vary by test vehicles (Figure 3- 3).
2. Select Read codes from the diagnostic function list (Figure 3- 4).
3. All the DTCs of the Transmission control module are displayed. Press
Save to save the data or press ESC to exit without saving.
Erase Codes
1. Select Erase codes from the diagnostic function list (Figure 3- 4).
2. Follow the on-screen instruction and make sure the ignition on and
engine off. Press Yes to continue.
3. A confirmation message “DTCs and freeze data will be deleted. Are
you sure you want to continue?” will pop up to ask for your confirmation.
Press Yes to continue.
4. Erase Codes command will be sent and you can perform Read Codes
function to verify. Press any key to continue.
Figure 3- 11 Sample Transmission Trouble Codes Screen