Use and Care Manual

9
3 Scan
The AutoLink AL629 is a powerful OBDII scan tool that provide basic
diagnosis and read and erase codes for four systems: ABS, SRS, engine,
and transmission.
Before using this scan function, please follow the on-screen instructions for
selections from vehicle manufacturer to model year to identify the vehicle
being tested.
1. Turn the ignition on but do not start the engine.
2. Locate the 16-pin OBDII diagnostic connector (usually under the dash
near the steering column). Plug in the AL629 and wait for the Main
Screen to appear.
3. Select Scan icon in the Main Screen Figure 2- 2.
4. Select a specific vehicle manufacture’s regional coverage.
5. From the vehicle make screen, select a specific vehicle manufacture
and press OK button.
Figure 3- 1 Sample Vehicle Manufacture Region Screen