Installation Guide

ManualsBrandsAUTOJIERUI ManualsElectronicsBluetooth music module receiver

1. Production Introduction

1.1 Main Features:

1. Plug & Play: installed via original CD changer port, easy and fast, perfectly

integrated with the car.

2. Wireless A2DP Playback: easily streaming music of Bluetooth devices into

factory car stereo system.

3. Hi-fi Sound Quality: Connected to car stereo via wire harness, no

interference and no loss of sound quality, rivaling original CD sound.

4. Allow you to easily have popular configuration of advanced car stereo, is the

best choice for safe driving and enjoying digital music.

1.2 Note

1. Doesn’t support hands-free phone call(HFP): It doesn’t supports

answer/hang up etc. Via car radio buttons and steering wheel buttons

2. Doesn’t support Bluetooth AVRCP Control: Prev/Next Track, Pause/Play,

Fast forward/backward via car radio buttons or steering wheel buttons.

2. Installation Guide

Before installation, Please read this manual carefully.

2.1 Installation Preparation

1. This product operates on a vehicle with 12 volt or 5 volt DC negative ground

system. Do not use it on other voltage system.

Summary of content (7 pages)

PAGE 1
. Production Introduction 1.1 Main Features: 1. Plug & Play: installed via original CD changer port, easy and fast, perfectly integrated with the car. 2. Wireless A2DP Playback: easily streaming music of Bluetooth devices into factory car stereo system. 3. Hi-fi Sound Quality: Connected to car stereo via wire harness, no interference and no loss of sound quality, rivaling original CD sound. 4.
PAGE 2
. This product only fits OEM or aftermarket car stereo with CD changer port and different solutions of Bluetooth adapter would be adopted according to different brands of vehicles or different car radios. 3. Make sure car stereo is powered off before installation. Otherwise the car stereo may be damaged. It is suggested to install it a car dealer shop or professional car stereo store. 4.
PAGE 3
BTA after paired successfully. Test with mobile phone to confirm whether Bluetooth music work normally. 7. After successful test, re-assemble the radio, and put wire harness and module unit box in proper place (glove box, storage box, etc.), fasten screws between module unit and wire harness. Put back car head unit into original position. Now the installation is finished. 2.3 Important Installation Notes 1.
PAGE 4
3 Applicable Car Models Toyota Honda Volkswagen Ford Fiat Audi Benz Suzuki Nissan Porsche Acura BMW Wolvo Mazda Skoda Peugeot Renault Citroen Opel,etc This product only needs to have AUX interface or the criginal Car CD player can be used with AUX interface. (Please consult or confirm that you have an AUX interface before purchasing) 1. Not compatible with stereos that have 6 CD Player built into the the stereo 2. Not compatible with the “blue & me “ Bluetooth audio streaming feature 3.
PAGE 5
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual vO1 1.2 List of applicable FCC rules FCC Part 15 Subpart C 15.249& 15.209 1.3 Specific operational use conditions The module is a Bluetooth module Operation Frequency: 2402-2480MHz Number of Channel: 79 Modulation: GFSK Type: PCB Antenna Gain: 1 dBi Max. The module can be used for mobile or portable applications with a maximum 1.0dBi antenna.
PAGE 6
2.9 Information on test modes and additional testing requirements Operation Frequency: 2402-2480MHz Number of Channel: 79 Modulation: GFSK Host manufacturer must perfom test of radiated & conducted emission and spurious emission, etc according to the actual test modes for a stand-alone modular transmitter in a host, as well as for multiple simultaneously transmitting modules or other transmitters in a host product.
PAGE 7
Federal Communication Commission Statement (FCC, U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.