User manual

TROUBLE SHOOTING
OPEL / VAUXHALL
5
A0909032-1
CONNECTION
Connection
1. Locate the diagnostic connector
on the vehicle. Se appendix B
for common connector
locations.
2. Insert the program cassette
into the instrument.
3. Connect the serial cable to the
diagnostic connector.
4. Connect the serial cable to the
Multi-Tester pro, if necessary
using an extension cable
included in the basic kit.
NOTE!
Never connect the battery
cable to the Multi-Tester pro
when using serial applications.
When the serial cable is used,
power is supplied via the serial
cable.