User manual

TROUBLE SHOOTING
OPEL / VAUXHALL
16
A0909032-1
TROUBLE SHOOTING
Erase transponder keys
This function will erase all programmed transponder keys from the
Immobiliser memory. After this function has been used, none of the
vehicle’s keys will start the engine until they are re-programmed into
the Immobiliser. If a key has been lost / stolen, it is recommended to
erase all keys before programming the new keys, to ensure that the
Immobiliser will only recognise the keys held by the vehicle owner.
Program transponder key
This function will program a new transponder key into the Immobiliser
memory so that the key will be able to start the engine. You will be
prompted to insert the key to be programmed into the ignition. Then
follow the on-screen instructions to program the new key.
When communications have been established, you will be required to
enter your authorisation code before being allowed to program keys.
Your authorisation code is supplied to you by Autodiagnos when you
register the application. See the section on Multi-Tester pro registration
later in this manual for more details.
After entering the authorisation code, the following menu will be
displayed.