User manual

TROUBLE SHOOTING

OPEL / VAUXHALL

A0909032-1

TROUBLE SHOOTING

F1: User help

F3: Save information

Programming

This function is only available on Immobiliser, Central locking, and Anti-

theft warning ECUs. It allows the transponder keys and remote-key fobs

to be erased and/or programmed for the vehicle.

For Immobiliser systems, transponder keys can be programmed into the

Immobiliser memory so that they may start the vehicle. For Central

locking or Anti-theft warning systems, the remote-key fob can be

programmed into the ECU so that it may be used to remotely operate

the door locks.

For Immobilisers and Anti-theft warning systems a four-digit pass code

must be entered before programming is allowed by the ECU. On entering

the programming menu, you will be asked for the four-digit pass code for the

car. This code can be found on the car pass supplied with the vehicle, and

is used to prevent unauthorised access to the key programming functions.

If the car pass is not available, the code can be obtained from a main dealer.

The vehicle registration details will be required.

If an incorrect code is entered, you will be prompted to try again. It is

important to enter the pass code carefully as the ECU will activate it’s

security wait timer if an invalid pass code is entered. In this mode, it will

be impossible to erase or program keys until the security wait time has

expired.

Once the correct pass code is entered, the programming menu will be

displayed. For Immobiliser systems the following options are available.

Diagnose:ASTRA-G:2000:Body:IMMOBILISER

Erase transponder keys

Program transponder key

Erase transponder keys

é/ê/ç/è/ENTER/EXIT

F1:Help F2: F3:Snapshot

Enter 4 digit vehicle pass code

0000