User manual

Getting Started

Setting up

Multi-Cartridge Manager - Installation

The Multi-Cartridge Manager software is used to manage the information held on the

Multi-Cartridge. It allows software applications and customer licence information to be

updated when required. It is recommended that this software is installed immediately,

by following these steps:

Note: Do not connect the Multi-Cartridge until advised.

1. Insert the CD into the drive; it should auto-run and display the ‘Autodiagnos’

window.

2. Press the ‘Multi-Cartridge’ button. Follow the on-screen prompts to install the

Multi-Cartridge Manager software.