User manual

Using Multi-Tester Pro

Snapshot Reader functions

During diagnostic procedures, the Multi-Tester Pro has the facility to save a snapshot

of information. The information can be viewed on the Multi-Tester Pro at a later time

or can be downloaded to a PC, using the Snapshot Reader application.

To use this feature, press the F3 button during a diagnostic test procedure and the

currently viewed information will be saved within the Multi-Tester Pro memory.

Viewing Snapshots

To view currently stored snapshots on the Multi-Tester Pro select the ‘View

Snapshots’ option at the top of the main menu.

Note: This menu option will only be available when snapshots are stored.

Downloading Snapshots

1. To download snapshots from the Multi-Tester Pro to a PC, ensure the ‘Snapshot

Reader’ application has been previously installed on the PC.

2. Switch on the Multi-Tester Pro. Connect the USB cable to the Multi-Tester Pro,

and PC.

Snapshots

1) View Snapshots

2) Download Snapshots to P.C

3) Memory Statistics

/ /ENTER/EXIT

AU0042