User manual

Using Multi-Tester Pro

Functionality Overview

Each system will have a specific set of functions described thereafter. Most functions

will provide the opportunity to take a snapshot using the function keys.

Electronic Control Unit (ECU) Identification: The ECU identification will give the

electronic signature of the ECU.

Read Diagnostic Trouble Code (DTC) memory: All registered DTCs in the relevant

ECU are indicated on the display. Use and to move the cursor for more

information on each DTC. Additional information about the fault is then shown on the

display. The numerical codes can be used to look in the service literature for more

information about the component or fault.

1. ECU information

2. List of stored fault codes (DTCs)

3. Text relevant to the highlighted DTC

4. Additional DTC information

5. Function keys:

F1 - User help.

F2 - Erase DTCs.

F3 - Save information.

For some DTCs, further information about the selected component is available. Press

‘?’ or ‘ENTER’. Further information about the component is shown on the display. Use

and to scroll through the help text and use and to scroll one screen at

a time.

AU0034