Specifications

the product. Launch the product on the other machine, and register
and activate it. Users have a trial period to register and activate the
product on their machines.
■ Launch and customize the product as necessary. Create a master
image and distribute it to users. If users’ computers are connected to
the Internet, the product is automatically activated. Users whose
computers are not connected to the Internet have a 7-day grace period
to register and activate the product.
4 Apply the master image to the target computers.
Distribute Network Licensed Products
You can use a master image to distribute network licensed products.
To distribute a network licensed product to multiple computers using a master
image
1 Create a network deployment for a network licensed product. For more
information, see Create an Original Deployment (page 8).
2 Install the product from the deployment onto the master computer.
NOTE A license server must be running, and each computer must be
connected to the network in order for the product to obtain a license.
3 After the product has been installed, use imaging software to create a
master image of the system's hard drive.
4 Apply the master image to the target computers.
Restore the Master Image
The following procedure assumes that you have saved a copy of each
computer’s AdLM folder (and Product Licenses folder, if present) to either
another computer or a disc before you reformat the computer.
To restore a product using a master image
1 Exit the application. Do not run the application again until after you
have completed this procedure.
Alternative Distribution Methods | 25