2017

If you are using a stylus, remove brush strokes manually by using the back of the stylus to “erase” strokes.
If the result is displayed, erasing reveals the front clip on the canvas. If the output matte is displayed, erasing
reveals the matte.
Restricting Brush Strokes
You can limit the area where brush strokes are applied on the canvas. Use the matte paint mode controls to
limit painting on the canvas to the matte. You can also invert the matte to limit paint to only the areas
outside the original matte.
To limit which regions of a source front can be used by its source matte, use the Matte Clip option box in
the source controls. See
Restricting Strokes with the Source Matte (page 843).
To limit where brush strokes are applied using the matte:
1 Enable Use Matte.
2 If you want to paint outside of your selection, enable Invert.
3 Draw strokes.
Brush strokes are applied only to the areas included in your selection.
4 Disable Use Matte to turn off matte restrictions.
Scaling Brush Strokes
You can set scaling options for brush strokes associated with the Paint Node. By specifying the previous
resolution of an input clip before it was resized, the brush strokes applied to the clip can also be scaled based
on these settings.
To display the stroke scaling options:
1 Double-click the Paint node.
2 Click Node Setup.
Paint Node | 851