2017

(a) Work On box
To colour correct all or part of a clip:
1 Select an option from the Work On box.
To:Select:
Use the Basics menu to modify the entire image. In Master mode, you cannot
output a matte.
Master
Generate a matte from the front clip selective colour correction. You can then
use the Basics menu to modify the range of colour defined by the matte. In a
Sel. 1, Sel.2, or Sel. 3
selective mode, you can output the matte, selective, or result. See Selecting
Colour Ranges for Colour Correction (page 815).
Interactively Updating Colour Information
When you modify the colours in a clip, create mattes, or scroll through the image window, you can either
have the image and vectorscope update interactively as you move the cursor or have them update afterwards.
When interaction is slow, update the image afterwards to avoid lags in processing time, especially when
working on high-resolution clips or images. Lags in processing time can also occur in Result view, where a
large amount of processing is required to display the result.
■ To update colour information interactively: In the Colour Warper menu, enable Regen. When you scroll
through the clip, the 2D vectorscope or 3D vectorscope is dynamically updated to display the colour
distribution of each frame. When you drag a trackball or field, the image is dynamically updated, showing
the changing colour information.
■ To update colour information after completing an operation: In the Colour Warper menu, disable Regen.
After you scroll through a clip, the 2D vectorscope or 3D vectorscope is updated to display the colour
distribution of the current frame. After you make an adjustment with a Colour Warper control, the image
is updated
About the Colour Warper | 811