2017

Y Position field Displays the position of the selected surface points along the Y axis. Editable.
Z Rotation field Displays the rotation of the selected surface points along the Z axis. Editable.
X Scale field Displays the scale of the selected surface points along the X axis. Editable.
Y Scale field Displays the scale of the selected surface points along the Y axis. Editable.
Proportional Scale button Enable to scale the surface points proportionally.
Magnet button Enable to transform a range of surface points. Use in conjunction with the Magnet
Transformation box. See Transforming Multiple Points (page 517).
Magnet Transformation box Select a transformation type to use when Magnet is enabled.
Magnet Curve Editor Displays the weighted polarity from the centre to the edge of the magnet.
Magnet Curve Home button Resets the position of the magnet curve after panning.
Magnet Curve Undo button Undoes a change to the Magnet Curve Editor.
Magnet Curve Reset button Resets the Magnet Curve Editor.
UV Point Position X field Displays the position of the selected UV points along the X axis. Editable.
UV Point Position Y field Displays the position of the selected UV points along the Y axis. Editable.
Stabilizer button Opens the Stabilizer menu to apply stabilizing data to the selected UV points. Available
for Bilinear surfaces only.
Tracking Mode box Select wether to track each selected vertex or UV point individually (Each Point) or
grouped via two proxy trackers, and from which parameters the proxy trackers extrapolate the movement
(Pos/Scale, Pos/Rot, Pos/Rot/Scale).
■ Each Point: Perform the tracking using a tracker for each selected vertex or UV point.
■ Pos/Rot: Perform the tracking using two proxy trackers that extrapolate the position of the selected
vertices or UV points, based on the detected position and rotation motion.
■ Pos/Scale: Perform the tracking using two proxy trackers that extrapolate the movement of the selected
vertices or UV points, based on the detected position and scale motion.
■ Pos/Rot/Scale: Perform the tracking using two proxy trackers that extrapolate the movement of the
selected vertices or UV points, based on the detected position, scale and rotation motion.
Shape Channel button Enable to use the Shape channel in the Channel Editor. Disable to use individual
channels in the Channel Editor. See
Reshaping Using the Channel Editor (page 511).
Copy To Vertices button Click to copy UV point data to vertex animation channels.
Auto Adjust button Enable to scale adjacent tangents automatically. Auto Adjust creates a smooth curve
between points in the deformation. If you want to work on a specific area of the image without affecting
other tangents, disable Auto Adjust.
NOTE If you move a tangent explicitly, it is not affected by Auto Adjust. Click Reset Points or Reset Shape so that
the tangents will be affected by the Auto Adjust mode.
Reset Selection box Select whether to reset selected points, tracking data, or the shape of the surface. Click
Reset All to reset all data.
Blending Settings
Use the settings in the Blending tab to adjust blending curve for each surface.
Action Surfaces | 507