2017

To modify highlight and shadow values using the Highlights and Shadows fields:
1 Do one of the following:
■ To set proportional R, G, and B values, enable Prop and enter a value in one of the (left-to-right)
R, G, and B Highlights and Shadows fields.
■ To set independent R, G, or B values, disable Prop and enter the value in the corresponding
(left-to-right) R, G, or B Highlights and Shadows fields.
(a) Highlight/Shadow fields
To modify highlight or shadow values using the LUT Editor graph:
1 Do one of the following:
■ To set proportional R, G, and B values, select All from the Edit Curve box, and then drag the
horizontal highlight or shadow line up or down.
■ To set independent R, G, or B values, select Red, Green, or Blue from the Edit Curve box, and then
drag the horizontal highlight or shadow line up or down.
Modifying the Gamma of the Conversion Curve
Set the gamma correction value to correspond to the display gamma you set your system to use. You can
select a preset from the Gamma Correction box or enter a custom value.
To modify the gamma correction curve using the Gamma Correction fields:
1 Select an option from the Gamma Correction box.
Applying Colour Management to Clips | 1285