2012

Table Of Contents
8 On the Configure Deployment page, select the products to include
in the deployment, and if required add language pack(s) from the
Product Language drop-down (see Choose a Language (page 33)).
9 Click Create.
After the deployment is created, the Deployment Configuration
Complete page opens, presenting useful paths to the new deployment
and a link for registering products online.
10 After you have finished using this screen, click Finish.
Create a Deployment Using Configured or
Customized Values
If you plan on altering your deployment by removing features or restricting
access to online resources you can create a configured or customized
deployment.
To create a custom deployment
1 Close all running applications on your computer and start the
Installation wizard.
2 On the Installation wizard, if required, select an alternate language
for the Installation wizard from the Installation Instructions
drop-down, and then click Create Deployment.
3 On the Configure Deployment page, Administrative Image
section, specify the following data:
a In the Deployment Configuration Name field, enter a
descriptive name for the deployment that identifies the user group,
platform, or other attribute to differentiate this deployment from
others. The name you enter here is the name of the shortcut users
will access to install the product.
b In the Administrative Image Path field, enter the path to your
existing shared network location, or use the Browse button to
navigate to that location. This area is where you create and store
your administrative image. Users install the program from this
location.
NOTE If you do not know how to create a network share, see
Create
a Network Share
(page 52).
Install Autodesk Navisworks for Multiple Users | 67