2012

When this check box is clear, the surface of the parametric objects is used for
the shortest distance measurement instead.
NOTE Changing this option does not affect any measurement currently in place.
To see any changes, clear the measurement, and start again.
Snapping Page
Use the options on this page to adjust the cursor snapping.
Picking
Snap to Vertex Select this check box to snap the cursor to the nearest vertex.
Snap to Edge Select this check box to snap the cursor to the nearest triangle
edge.
Snap to Line Vertex Select this check box to snap the cursor to the nearest
line end.
Tolerance Defines the snapping tolerance. The smaller the value, the closer
the cursor must be to a feature in the model before it snaps to it.
Rotation
Angles Specifies the multiplier for the snapping angle.
Angle Sensitivity Defines the snapping tolerance. The value you enter here
determines how close to the snapping angle the cursor must be for snap to
take effect.
Viewpoint Defaults Page
Use the options on this page to define attributes that are saved with viewpoints
when you create them.
When you modify default viewpoint settings, your changes do not affect the
currently opened Autodesk Navisworks file. They are used as soon as you open
a new Autodesk Navisworks file, or start a new Autodesk Navisworks session.
Save Hide/Required Attributes Select this check box to save viewpoints with
hidden/required markup information about objects in your model. When you
use a viewpoint again, the hidden/required markups set when the viewpoint
was saved are reapplied.
Options Editor Dialog Box | 711