2012

TIP If you can see through some objects, or some object parts are missing, turn
off backface culling.
TIP If you want to restore the default values, click the Reset to Defaults button.
Orientation Tab
Use this tab to adjust the real-world orientation of your model.
NOTE This tab is only available for 3D models.
Up
X, Y, Z Specify the X, Y, and Z coordinate values. By default, Autodesk
Navisworks takes the positive Z-axis as Up.
North
X, Y, Z Specify the X, Y, and Z coordinate values. By default, Autodesk
Navisworks takes the positive Y-axis as North.
TIP If you want to restore the default values, click the Defaults button.
Speed Tab
Use this tab to adjust the frame rate speed to reduce the amount of drop-out
during navigation.
TIP If this does not improve navigation, try switching off the Guarantee Frame
Rate option.
Frame Rate Specifies the number of frames per second (FPS) that are rendered
in the Scene View.
The default setting is 6. You can set the frame rate from 1 through 60 frames
per second. Reducing the value reduces drop-out, but can cause jerky
movement during navigation. Increasing the value ensures a smoother
navigation, but increases drop-out.
TIP If you want to restore the default values, click the Defaults button.
698 | Chapter 16 Reference