2012

Table Of Contents
To play a scene in the Animator window
1 If the Animation window is not already open, click Animation tab
Create panel Animator
.
2 From the Scene Picker drop-down list, select the scene you want to
play in the Animator tree view.
3 Click Play
on the Animator toolbar.
To play a scene from the Animation tab
1 Click Animation tab Playback panel.
2 From the Available Animations drop-down list, select the scene you
want to play.
3 Click Play
on the Animation toolbar on the Playback panel.
To adjust the scene playback
1 If the Animator window is not already open, click Animation tab
Create panel Animator .
2 Select the desired scene in the Animator tree view.
3 Use the Loop, P.P., and Infinite check boxes to adjust the way the
scene plays:
If you want the scene to play back continuously, select the Loop
check box. When the animation reaches the end, it will reset back
to the start and run again.
If you want the scene to play in ping-pong mode, select the P.P.
check box. When the animation reaches the end, it will run backward
until it reaches the start. This will only happen once, unless you also
select the Loop check box.
If you want the scene to play indefinitely (that is, until Stop
is
clicked), select the Infinite check box. If this check box is unchecked,
the scene will play until its end point is reached.
NOTE Selecting Infinite disables Loop and P.P.
4 If necessary, use the Active, Loop, and P.P. check boxes to adjust the
playback of the individual scene components.
NOTE Only animations with the Active check box selected will play.
Create Object Animations | 537