2012

Table Of Contents
NOTE If you want to move all planes together, you can link them. Otherwise,
you can only move one (the current) plane at a time.
Customize Section Plane Alignment
By default, section planes are mapped to one of the six primary directions as
follows:
Default AlignmentPlane NamePlane No
TopPlane 11
BottomPlane 22
FrontPlane 33
BackPlane 44
LeftPlane 55
RightPlane 66
You can select a different alignment for the current section plane. There are
6 fixed alignments and 3 custom alignments to choose from:
Top
- aligns the current plane to the top of model.
Bottom
- aligns the current plane to the bottom of model.
Front
- aligns the current plane to the front of model.
Back
- aligns the current plane to the back of model.
Left
- aligns the current plane to the left of model.
Right
- aligns the current plane to the right of model.
Align To View
- aligns the current plane to the current viewpoint
camera.
Align To Surface
- enables you to pick a surface, and place the current
plane on that surface, with its normal aligned to the normal of the triangle
picked.
Sectioning | 457