2012

Table Of Contents
Attachment Points
By default, links are attached to the default center of the item's bounding box.
You can override this with more convenient attachment points. If you add
more than one attachment point, the link is displayed attached to the closest
attachment point to the camera during navigation. This allows you to set up
links so that they are always available for following when drawn in 3D mode
during navigation, and do not disappear behind objects.
To draw links in 3D mode
Note: In 3D mode links can become hidden by other objects in the scene
when you are navigating.
1 Click the application button
Options.
2 In the Options Editor, expand the Interface node, and click the
Links option.
3 On the Links page, select the In 3D check box.
Links now float in 3D space just in front of their attachment points to
the items.
4 Click OK.
To show leader lines
1 Click the application button
Options.
2 In the Options Editor, expand the Interface node, and click the
Links option.
3 On the Links page, Enter the X- and Y- distance in Leader Offset for
the number of pixels to the right and up that these leader lines will use.
The default angle is 0. The recommended angle is 45.
Links in the Scene View have now leader lines pointing to the
attachment point on the items.
Links | 423