2012

Display Links
You can switch links in the Scene View on and off. You can also toggle the
display of each of the link categories. Autodesk Navisworks remembers the
selected visibility setting between sessions.
When links are switched on, you can reduce the screen clutter by restricting
a number of links can be shown in the Scene View, hiding colliding icons,
and using culling. Finally, as some standard link categories can have comments
associated with them, you can choose to only draw links with attached
comments.
To toggle the display of links
■ Click Home tab ➤ Display panel ➤ Links .
Menu: Classic user interface: Tools ➤ Links
To control the display of standard links
1 Click the application button
➤ Options.
2 In the Options Editor, expand the Interface node, expand the Links
node, and click the Standard Categories option.
3 On the Standard Categories page, select the Visible check box to
display the corresponding link category. Clearing the check box hides
the corresponding link category in the Scene View.
By default, all standard link categories are visible.
4 Click OK.
To control the display of user-defined links
1 Click the application button
➤ Options.
2 In the Options Editor, expand the Interface node, expand the Links
node, and click the User-Defined Categories option.
3 On the User-Defined Categories page, select the Visible check box
to display the corresponding link category. Clearing the check box hides
the corresponding link category in the Scene View.
By default, all user-defined link categories are visible.
Links | 421