2012

Table Of Contents
To enable stereo rendering
Click View tab Stereo panel Enable Stereo .
NOTE This option is only available if you have the required hardware, and the
correct driver and display settings.
To adjust the stereo effects
1 Click View tab Stereo panel Stereo Options tool launcher
.
2 In the Stereo Options dialog box, move the Magnitude slider to vary
the strength of the effect.
3 To adjust the out of screen effect, select the Enable check box, and then
move the slider to control how much of the scene appears out of the
screen during navigation.
4 If you need to swap the left and right eyes over, select the Swap Eyes
check box. This can be useful when moving from CRT to a large screen
projector and back.
5 Click OK.
Control Render Quality | 335