2012

Table Of Contents
Rotate Camera
You can adjust the angle of the camera during navigation in a 3D workspace
only.
For the current viewpoint, use the Tilt window to rotate the camera up/down,
and the Roll entry box on the ribbon to rotate the camera left/right. For saved
viewpoints, you can use the Edit Viewpoint dialog box (page 692) to adjust the
camera values.
Tilt Window
The tilt angle is indicated in the scene's units below (negative) or above
(positive) horizontal (0) at the base of the window.
You can use the Tilt window with the Walk tool on the navigation bar to
look up and down. If your mouse has a wheel, you can use it to adjust the tilt
angle.
To toggle the Tilt window
Click Viewpoint tab Camera panel Show Tilt Bar
.
Command entry: CTRL + F7
To roll camera up/down
Drag the slider up or down on the Tilt window to roll the camera.
Navigate a Scene | 303