2012

Table Of Contents
Fly Mode
In Fly mode, you can move around the model like in a flight simulator.
To use Fly mode to move through the model
1 Click Fly on the Navigation Mode toolbar.
2 Hold down the left mouse button to move the camera forward. As in a
flight simulator, the left mouse button banks left/right when dragged
left or right and tilts up/down when dragged up or down.
NOTE Holding down the SHIFT key speeds up this movement.
3 Use the up and down cursor keys to zoom the camera in and out
respectively; use the left and right cursor keys to spin the camera left
and right respectively.
NOTE Holding down the CTRL key rotates the camera around its viewing
axis, while still moving forward.
Menu: Classic user interface: ViewpointNavigation ModeFly
Command entry: CTRL + 9
Turntable Mode
In Turntable mode, you can spin the model around the up vector as though
the model is sitting on a turntable. In this mode, the up direction is always
maintained.
Navigate a Scene | 271