2012

Table Of Contents
Once you start walk mode, the cursor changes to the walk cursor. To walk
through the model, you drag in the direction in which you want to move in.
To use walk mode to move through the model
1 Click Walk on the Navigation Mode toolbar.
2 To move, hold down the left mouse button as you drag in the direction
you want to walk, or use the cursor keys. The camera spins left and right,
and moves forwards and backwards.
NOTE Holding down the SHIFT key speeds up this movement.
3 To glide, hold down the CTRL key as you drag the mouse. The camera
glides left and right and up and down.
As walk mode is camera-centric, this mode differs from the normal pan
mode in that the camera is moved rather than the model.
4 To tilt the camera up and down, spin the mouse wheel.
Menu: Classic user interface: ViewpointNavigation ModeWalk
Command entry: CTRL + 2
Look Around Mode
In Look Around mode, you can rotate the current view vertically and
horizontally. When rotating the view, your line of sight rotates about the
current eye position, like turning your head.
266 | Chapter 5 Explore Your Model