2012

Table Of Contents
4 Click OK.
2 Display a wheel that has the Zoom tool.
3 Click the Zoom wedge.
The magnification of the model is increased and you are zoomed in
closer to the model. If you hold down the SHIFT key while clicking the
Zoom wedge, the model is zoomed out; you can hold down the CTRL
key to zoom in.
To zoom a view in and out by dragging
1 Display one of the Full Navigation wheels, or one of the View Object
wheels.
2 Click and hold down the Zoom wedge.
The cursor changes to the Zoom cursor.
3 Drag vertically to zoom in or out.
4 Release the button on your pointing device to return to the wheel.
To zoom into an area of the model by specifying window
1 Display one of the Full Navigation wheels or the mini View Object wheel.
2 Press and hold down the SHIFT key.
3 Click and hold down the Zoom wedge.
The cursor changes to the Zoom cursor.
4 Drag the pointing device to define the opposite corner of the window
that defines the area in which you want to zoom.
NOTE Holding down the CTRL key while defining the second point of the
window determines if the first point of the window is used as the corner or
center of the window being dragged. When the CTRL key is held down, the
first point defines the center of the window.
5 Release the button on your pointing device to return to the wheel.
To zoom in and out by scrolling the mouse wheel when the SteeringWheels
is displayed
1 Display one of the wheels other than the big Tour Building wheel.
2 Scroll the wheel forward or backward to zoom in or out.
3 Release the button on your pointing device to return to the wheel.
262 | Chapter 5 Explore Your Model