2012

Table Of Contents
To restore a previous view with the Rewind History panel
1 Display a wheel.
2 Click and hold the Rewind wedge.
The Rewind History panel is displayed.
3 While holding down the button on your pointing device, drag to the
left or to the right to restore a previous view.
Dragging to the left restores an older previous view. Dragging to the
right restores a view that is newer than the one you are currently viewing.
You must have previously used the Rewind tool to see views available
on the right. The current position in the navigation history is indicated
by the orange box that is dragged along the Rewind History panel.
Up/Down Tool
Unlike the Pan tool, you use the Up/Down tool to adjust the height of the
current viewpoint along the model's Z axis. To adjust the vertical elevation
of the current view, you drag up or down. As you drag, the current elevation
and the allowed range of motion is displayed on a graphical element called
the Vertical Distance indicator.
The Vertical Distance indicator has two marks that show the highest (Top)
and lowest (Bottom) elevation the view can have. While changing the elevation
with the Vertical Distance indicator, the current elevation is shown by the
bright orange indicator, while the previous elevation is shown by the dim
orange indicator.
To change the elevation of a view
1 Display one of the Full Navigation wheels or the Tour Building wheels.
Navigate a Scene | 257