2012

Table Of Contents
To orbit a model with the Orbit tool
1 Display one of the View Object or Full Navigation wheels.
2 Click and hold down the Orbit wedge.
The cursor changes to the Orbit cursor.
3 Drag to rotate the model.
NOTE Use the Center tool to re-center the model in the current view, if you
are using one of the Full Navigation or View Object wheels.
4 Release the button on your pointing device to return to the wheel.
To orbit around an object with the Orbit tool
1 Press ESC to make sure no commands are active and to clear any
previously selected objects.
2 Select the objects in the model for which you want to define the pivot
point.
3 Display one of the View Object or Full Navigation wheels.
4 Click and hold down the Orbit wedge.
The cursor changes to the Orbit cursor.
5 Drag to rotate the model.
6 Release the button on your pointing device to return to the wheel.
To turn on selection sensitivity for the Orbit tool
1 Display one of the View Object or Full Navigation wheels.
Navigate a Scene | 253