2012

3 Drag the cursor to the desired location of the model.
4 Release the button on your pointing device when the sphere is displayed.
The model is panned until the sphere is centered.
To specify the target point for the Zoom and Orbit tools
1 Display one of the Full Navigation wheels or the big View Object wheel.
2 Click and hold down the Center wedge.
3 Drag the cursor over the desired location of the model.
4 Release the button on your pointing device when the sphere is displayed.
The model is panned until the sphere is centered.
5 Use the Zoom or Orbit tool to reorient the view of the model.
If you are using one of the Full Navigation wheels, hold down the CTRL
key before using the Zoom tool.
Forward Tool
You use the Forward tool to change the magnification of the model by
increasing or decreasing the distance between the current point of view and
the pivot point. The distance that you can move forward or backward is limited
by the position of the pivot point.
NOTE In orthographic views, the Forward tool is limited to the distance between
the current position and the pivot point. In perspective views, it is not limited, so
you can move the cursor through the pivot point.
248 | Chapter 5 Explore Your Model