2012

Table Of Contents
2 In the Autodesk NavisworksBatch Utility dialog box, use the Input
area to create a list of design files for conversion:
Select the drive and the folder where the design files are located.
Once the desired location is selected, use the File Type menu below
to filter the design files that are displayed on the right. The menu
contains a list of all currently supported file formats.
There are two methods you can use to choose the files for conversion.
You can double-click files to add them to the conversion list.
Alternatively, you can click the Add File Spec button. This will
make Autodesk Navisworks convert the files located in the selected
folder. The option chosen in the File Type menu determines which
files are converted.
3 In the Output area, As Single File tab, click the Browse button.
4 In the Save Output As dialog box, browse to the desired folder, and
enter the name for the new file.
5 In the Save as Type drop-down list, select the required file format
(NWD or NWF), and click Save.
6 To automatically open the file as soon as its been created, select the
View File on Output check box.
7 Select the Increment Output File Names radio button if you want
to append a four digit number to the end of file name. By default, the
old output files are overwritten.
Manage Files | 229