2011

Override Material Select this check box to save material override information with the viewpoint. When you
use a viewpoint again, the material overrides set when the viewpoint was saved are reapplied.
NOTE Saving the state information with each viewpoint requires a relatively large amount of memory.
Collision
Settings Opens the
Collision dialog box.
Ribbon: Viewpoint tab ➤ Save, Load & Playback panel ➤ Edit Current Viewpoint
Menu: Classic user interface: Viewpoint ➤ Edit Current Viewpoint
Export Rendered Image Dialog Box
Use this dialog box to export a rendered scene into one of the file types supported by Autodesk Navisworks.
Type Use the drop-down list to select one of the file types supported by Autodesk Navisworks.
Choose from:
■ Targa
■ TIFF
■ JPEG
■ Windows Bitmap
■ EPix
■ PostScript
■ LWI
■ HDR (High Dynamic Range Image)
■ OpenEXR (High Dynamic Range Image)
■ PNG
■ QTVR Panoramic Movie
NOTE The QTVR Panoramic Movie will effectively export 32 images, rotating about the current camera position
to form a 360° panorama. Best results are achieved when the camera has zero tilt and is located in a position that
has a 360° panoramic view, for example, in the center of a room.
■ QTVR Object Movie
NOTE The QTVR Object Movie will effectively export an extensive number of images, (based on number of pan
frames x number of tilt frames, see “
QTVR Object Movie Settings Dialog Box” on page 475) pivoting the model
about its center point. Best results are achieved when the model is relatively small or compact.
■ Printer
Browse Opens the Save As dialog box, and enables you to specify the location, and the name of the file you
want to render to.
Size
Type Use the drop-down list to specify how to set the size of the exported image.
Choose from:
■ Explicit. Gives you full control of the width and height (the dimensions are in pixels).
■ Use Aspect Ratio. Enables you to specify the height. The width is automatically calculated from the aspect
ratio of your current view.
Export Rendered Image Dialog Box | 433