2011

4 Repeat this to measure the entire route. The optional dimension label displays the total distance along the
selected route.
TIP If you want to change the start point, right-click in the Scene View, and select a new start point.
Menu: Classic user interface: Review ➤ Measure ➤ Point Line
To calculate an angle between two lines
1 Click Review tab ➤ Measure panel ➤ Measure drop-down ➤ Angle
.
2 Click a point on the first line.
3 Click the first line at the point where it intersects the second line.
4 Click a point on the second line. The optional dimension label displays the calculated angle between the
two lines.
Menu: Classic user interface: Review ➤ Measure ➤ Measure Angle
To calculate the sum total of several point-to-point measurements
1 Click Review tab ➤ Measure panel ➤ Measure drop-down ➤ Accumulate
.
2 Click the start and end points of the first distance to be measured.
3 Click the start and end points of the next distance to be measured.
4 Repeat to measure more distances if necessary. The optional dimension label displays the sum of all
point-to-point measurements.
Menu: Classic user interface: Review ➤ Measure ➤ Accumulate
Measuring | 253