2011

Full Lights
This mode uses lights that have been defined with the Presenter tool.
To use lights defined with the Presenter tool
■ Viewpoint tab ➤ Render Style panel ➤ Lighting drop-down, and click Full Lights
.
Menu: Classic user interface: Viewpoint ➤ Lighting ➤ Full Lights
Scene Lights
This mode uses the lights that have been brought through from the native CAD file. If no lights are available,
two default opposing lights are used instead.
You can customize the intensity of scene lights in the File Options dialog box.
To use lights defined with the model
■ Click Viewpoint tab ➤ Render Style panel ➤ Lighting drop-down, and click Scene Lights
.
Menu: Classic user interface: Viewpoint ➤ Lighting ➤ Scene Lights
To adjust scene lights intensity
1 Click Home tab ➤ Project panel ➤ File Options
.
2 In the File Options dialog box, click the Scene Lights tab.
3 Move the Ambient slider to adjust the brightness of the scene.
TIP Turning on scene lights mode before following this procedure lets you instantly see the effect your changes
have on the scene rendering.
4 Click OK.
Head Light
This mode uses a single directional light located at the camera that always points in the same direction as the
camera.
You can customize the Head Light properties in the File Options dialog box (Home tab ➤ Project panel).
To use Head Light mode
■ Click Viewpoint tab ➤ Render Style panel ➤ Lighting drop-down, and click Head Light
.
Menu: Classic user interface: Viewpoint ➤ Lighting ➤ Head Light
Add Lighting | 207