2011

To generate a list of all design files used in the current model
1 In Autodesk Navisworks application, open the desired Autodesk Navisworks file, and click Home tab ➤
Tools panel ➤ Batch Utility
.
2 The Autodesk Navisworks Batch Utility dialog box is displayed, and the path to the current model is
automatically added to the Input area of the dialog box.
3 In the Output area, As Single File tab, click the Browse button.
4 In the Save Output As dialog box, browse to the desired folder, and enter the name for the text file.
5 In the Save as Type drop-down list, select the File List (*.txt) option, and click Save.
6 In the Autodesk Navisworks Batch Utility dialog box, click the Run Command button.
TIP If you want to automatically open the file as soon as it’s been created, select the View File on Output check
box before you click the Run Command button.
To append multiple design files into a single Autodesk Navisworks file
1 In Autodesk Navisworks application, click Home tab ➤ Tools panel ➤ Batch Utility
.
2 In the Autodesk Navisworks Batch Utility dialog box, use the Input area to create a list of design files for
conversion:
■ Select the drive and the folder where the design files are located. Once the desired location is selected,
use the File Type menu below to filter the design files that are displayed on the right. The menu contains
a list of all currently supported file formats.
■ There are two methods you can use to choose the files for conversion. You can double-click files to add
them to the conversion list.
Batch Utility | 149