2010

See also:
■ “SketchUp SKP File Reader” on page 104
STEP Page
Use this page to adjust the options for the STEP file reader.
Faceting Factor Enter the required value to control the level of faceting that takes place.
The faceting factor must be greater or equal to 0, where 0 results in the faceting factor being turned off. The
default value is 1. To get twice the number of facets, double the value. To get half as many facets, halve the value.
Larger faceting factors result in more polygons to a model and larger Autodesk Navisworks files.
Max Facet Deviation This setting controls the greatest distance between the edge of a facet and the actual
geometry.
If this distance is greater than the Max Facet Deviation value, Autodesk Navisworks adds more facets.
If the Max Facet Deviation is set to 0, then this function is ignored.
See also:
■ “STEP File Reader” on page 104
STL Page
Use this page to adjust the options for the STL file reader.
Default Units Specifies the type of units Autodesk Navisworks uses when opening STL files.
TIP If the chosen units type turns out to be wrong, you can rescale the model by using the File Units and Transform
option.
Override Normals Normals control how objects appears when lit. By default, this check box is clear, and the
file reader uses the data provided in the STL file, giving the most accurate visible results.
Select this check box if you want Autodesk Navisworks to ignore the normals, and generate the lighting data
instead, for example when the supplied model contains invalid lighting data.
NOTE Using this option is less accurate than using real lighting data in STL files.
See also:
■ “
STL File Reader” on page 105
VRML Page
Use this page to adjust the options for the VRML file reader.
Default Units Specifies the type of units Autodesk Navisworks uses when opening VRML world files.
Faceting Factor Enter the required value to control the level of faceting that takes place.
The faceting factor must be greater or equal to 0, where 0 results in the faceting factor being turned off. The
default value is 1. When you double the value, you get twice the number of facets. When you halve the value
you get half as many facets. Larger faceting factors result in more polygons to a model and larger Autodesk
Navisworks files.
Max Facet Deviation This setting controls the greatest distance between the edge of a facet and the actual
geometry.
If this distance is greater than the Max Facet Deviation value, Autodesk Navisworks adds more facets.
If the Max Facet Deviation is set to 0, then this function is ignored.
File Readers Node | 399