2009

Note:
The deployment location should be a shared network folder. To create a shared folder, see
“Create Shared Folders for Your Deployments”.
3. On the Select the Products to Include in the Deployment page, select the products and click Next.
4. Review the Autodesk software license agreement for your country or region. You must accept this
agreement to proceed with the deployment. Choose your country or region, click I Accept, and then
click Next.
Note:
If you do not agree to the terms of the license and want to terminate the installation, click Cancel.
5. On the Product and User Information page, enter the serial number and required personalization
data. Click Next.
6. On the General Deployment Settings page, choose whether or not you want to create a network log
and its location, and a client log. You can also run the client’s installation in silent mode and if you
want users to participate in the Customer Involvement Program. Click Next.
7. If you do not want to make configuration changes on the Review - Configure - Install page, click
Create Deployment. Then select Yes, to continue installing using the default configuration.
8. Select the Register products online link to register and activate your product, or click Finish and
register and activate later.
Enter Product and User Information
The Product and User Information page is used to personalize the program for your company. The
information you enter here is permanent and is displayed in the About Autodesk NavisWorks Simulate
2009 window (accessed by Help > About) on all workstations that install your deployment. Because you
can't change this information later without uninstalling, make sure you enter the correct information now.
You must also enter your product serial number in order to run the product. The product serial number is
located on the product packaging. The serial number must contain a three-digit prefix followed by an
eight-digit number.
To enter your serial number and personal information:
1. On the Product and User Information page, enter your product serial number and the required
personalization data.
Note:
Although it is required that you enter information in each box on this page, you can enter any
information that you want to convey to users who install the deployment.
2. Click Next.
Install NavisWorks for Multiple Users
33