2009

navigation view takes up the full screen with no interface showing. Pressing the F11 key for a second time
turns full-screen mode off. Full screen mode will always go to full screen on the primary display. If two
monitors are available, the interface can be placed on one whilst the main 3D view renders in full screen
on the other.
Sizing of Navigation Window
NavisWorks allows you to specify the size of the main navigation window. This can be of particular use if
you are composing a scene for image or animation export. By setting the window size to the same
proportions as your intended output, you can visualize exactly how it will result.
Explicit sizing of the main navigation window:
1. On the View menu, click Window Size. The Window Size dialog box is displayed.
2. From the Type drop-down list, select the sizing type you wish to specify:
• Select Use View to maximise the window size.
Or
• Select Explicit and enter the exact width and height you wish the window to be.
Or
• Select Use Aspect Ratio and enter the height you require and the width will be automatically
calculated from the aspect ratio of the current view.
3. Click OK to set the window size, or Cancel to return to NavisWorks without changing it.
Interface
287