2009

Table Of Contents
items.
4. Use the Method drop-down list to select the type of highlighting you want (Shaded, Wireframe or
Tinted).
5. Click the Color button to select the highlight color.
6. If you selected Tinted in the Method box, use the slider to adjust the Tint Level.
7. Click OK to set these options or Cancel to exit the dialog box without setting them.
Moving Objects
To move an object:
1. Select the object you want to move in the main NavisWorks window.
2. Click the Translate Item button on the Object Manipulation toolbar.
The translation tool is displayed with three colored axes at the correct angles relevant to the current
camera position.
3. Use the translation tool to change the position of the selected object:
To move the currently selected object, place the mouse over the square at the end of the desired
axis. When the cursor changes to , drag the square on the screen to increase/decrease the
translation along that axis.
To move the object along several axes at the same time, drag the square frame between the
desired axes.
Dragging the yellow square in the middle of the translation tool enables you to snap this center
point to other geometry in the model.
Note:
Object Manipulation
265